Embark Vickers on a journey to the core of hydraulic systems, where the heartbeat is the pump. These pumps go beyond expectations, providing the reliability and efficiency demanded by your operations. Vickers Pumps by Danfoss are known for their precision, reliability, and efficiency in fluid power applications. The Vickers brand carries a legacy of excellence in delivering high-performance hydraulic components. Yes, the Vickers hardness rating of a material is inversely proportional to the indentation size.

Design Services

• Vickers by Danfoss industrial valves give you their best day in, day out, in both stationary and mobile hydraulic applications.

{

• In 1921, the Vickers Hardness Test was developed by Robert L. Smith and George E. Sandland at Vickers Ltd.

|}

• In 1928, the Aviation Department became Vickers (Aviation) Ltd and soon after acquired Supermarine, which became the “Supermarine Aviation Works (Vickers) Ltd”.

{

• 1929 saw the merger of the acquired railway business with those of Cammell Laird to form Metropolitan Cammell Carriage & Wagon.

|}{

• Industrial applications require industrial-strength hydraulic systems—like those built with Danfoss piston pumps.

|}

• The average of the diagonal measurements is taken to get the single value to be used in the Vickers hardness test formula.

The hardness number is determined by the load over the surface area of the indentation and not the area normal to the force, and is therefore not pressure. The load is applied for a standard period of about 10 to 15 seconds, and the two diagonals of the indentation created are measured using a microscope. The hardness of a material can also be expressed in terms of the load used, for example, HV5 means the hardness calculated for a 5kg load.

Conversion to SI units

Armstrongs shipbuilding interests became the “Naval Yard”, those of Vickers on the west coast the “Naval Construction Yard”. The company went public in 1867 as Vickers, Sons & Company and gradually acquired more businesses, branching out into various sectors.

Vickers Hardness Testers for Precise and Versatile Applications

The Vickers test method involves pressing the indenter into the test material and measuring the diagonal lengths of the indentation left after the load is removed. The basic principle, as with all common measures of hardness, is to observe a material’s ability to resist plastic deformation from a standard source. The unit of hardness given by the test is known as the Vickers Pyramid Number (HV) or Diamond Pyramid Hardness (DPH). The hardness number can be converted into units of pascals, but should not be confused with pressure, which uses the same units.
{

{
• The load is applied for a standard period of about 10 to 15 seconds, and the two diagonals of the indentation created are measured using a microscope.

|}{

• The indentation made by using the indenter must have a properly defined shape to be able to be measured.

|}

• For example, the load applied ranges between 1 gf to 120 kgf, which depends on the material being tested.
• The hardness of a material can also be expressed in terms of the load used, for example, HV5 means the hardness calculated for a 5kg load.
• In the world of materials science and metallurgy, Vickers Hardness Test is one of the processes used to determine material hardness.

{

• In 1927, Vickers merged with Tyneside based engineering company Armstrong Whitworth to become Vickers-Armstrongs.

|}

|}

Additional UI, design, and readability adjustments

{
• This allows for accurate measurement of the matrix hardness while minimizing errors caused by surface porosity.

|}

• In 1919, the British Westinghouse electrical company was taken over as the Metropolitan Vickers Electrical Company; Metrovick.

{

• Even on the most exacting industrial applications, you’ll find our directional controls keep your maintenance simple and downtime at a minimum.

|}

• With innovations spanning from alternative energy and civil engineering to manufacturing and marine, we’re one of the world’s most trusted industrial hydraulic solution partners.
• Vickers Hydraulic Valves are available with or without integral relief valve section and are suitable for pressures up to 3000 psi.

{

• The Vickers test method involves pressing the indenter into the test material and measuring the diagonal lengths of the indentation left after the load is removed.

|}

Calculating the hardness of the material is straightforward using the above mentioned formula, and the Vickers hardness is expressed in this form xxxHVyy or xxxHVyy/zz. Where xxx stands for the Vickers hardness number, yy is the load, and zz is if the dwell time is beyond the approved standard of 10 to 15 seconds. For example, the load applied ranges between 1 gf to 120 kgf, which depends on the material being tested. The indenter must contact the specimen at a controlled velocity between 15 and 70 μm/s, not exceeding 0.2 mm/s.

Vickers Oils Marine Range

The Vickers hardness test is ideal for evaluating very small areas, thin materials, and coatings with high accuracy. With innovations spanning from alternative energy and civil engineering to manufacturing and marine, we’re one of the world’s most trusted industrial hydraulic solution partners. As a worldwide leader, Vickers Hydraulics designs and manufactures a comprehensive line of reliable, high-efficiency hydraulic systems and components. In 1960, the aircraft interests were merged with those of the Bristol, English Electric and Hunting Aircraft to form the British Aircraft Corporation (BAC). This was owned by Vickers, English Electric and Bristol (holding 40%, 40% and 20% respectively). The Supermarine operation was closed in 1963 and the Vickers name for aircraft was dropped in 1965.